Ready Mix Plaster Exporter, Manufacturer and Supplier
Counted as first among the best, we offer the superior quality of Ready Mix Plaster. It is used for different plastering applications. Procured from reliable sources, the quality of these products is never compromised at our end. Instant Plastering Ready Mix Plaster is manufactured in modern dry mix plant with computerised batch process. Plaster is ready to use by just mixing water at site. This process eliminates job-site mixing practices. Hence it gives consistent quality with required sand mesh sizes in exact proportion which is most important for compactness of plaster. Further to have desired workability, less rebounding losses, required slump properties and overall durability, polymers are added in Ready Mix Plaster.
Plastering is the process of covering rough surface of wall, column, ceiling and other parts of the building with thin coat of mortars to form a smooth, hard and durable surface capable of protecting external surface against penetration of rain water and other atmospheric vagaries. A good plaster needs to have strong adhesion on wall and ceiling with excellent water resistant, crack free and work ability properties that will protect the interior, provide flat base for painting, minimise the inconvenience of maintenance and speed up the construction. Therefore, in many ways, Plastering is as critical as structural members, brickwork, flooring, etc.
• Benefits of Ready Mix Plaster
• Reduces Costs:-Ready Mix Plaster with its greater compactness and inherent strength ensures substantial reduction in repairs and maintenance costs,while also enhancing life of the paint. • Saves Water:- Water consumption during construction is less as compared to traditional plaster. • Saves Time:- With its matchless features and properties, Birla Aerocon Ready Mix Plaster sets faster and requires less mixing time. This means that the construction gets comepleted quickly to meet scheduled timelines. • Excellent Workabilty:- It is a ready to use plaster with smart finish, Easy to use, Minimal wastage, Great coverage, High strength & durability.
• Areas of Application
• Internal bare brick walls • Hollow Concrete Blocks • Concrete Columns • R.C.C Ceilings • Shiperox Blocks Work • Flawless whiteness, an expression of purity • User friendly and easy in application
• Direction For Use:
The substrate needs to be cleaned and made free from grease and loose particles. The porous and absorbent substrates need to be pre-wetted prior to application of Ready Mix Plaster to prevent premature loss of water from the plaster. This will ensure that thin layer can be applied without cracking problems and proper cement hydration and adherence of the mortar to the substrate is attained. Use 7-8 liters of water for 40 kg Ready Mix Plaster Bag. Pour the Ready Mix Plaster while mixing for 4 -5 minutes with hand or still better with a mechanical mixer to achieve a good consistency. *Do not over mix. Allow mixture to stand for 2-3 minutes for additives to dissolve. Re-mix again for about 2 minutes, plaster is ready for use. Apply plaster to the substrate, using some pressure while finishing with a steel trowel or wooden float to ensure optimum bonding of the plaster to the substrate surface. Ready Mix Plaster can be used for interior as well as exterior wall.
• Packaging and Storage:-
Ready Mix Plaster is available in 40 kg bag and has a shelf life of 6 months subject to stored in a cool and dry location properly. As temperature, humidity, water addition and other parameters vary from site to site, the above information should be treated as a general guideline and Keep it out of reach of children.
• Coverage and Water Demand:-
Ready Mix Plaster approx. coverage per 40 kg bag is as under: 10-12 mm plaster on light weight blocks is 17-18 sq. ft. 10-12 mm on brick wall 14-15 sq. ft. 18 mm on light weight blocks is 11 sq. ft. 25 mm on brick wall 7-7.5 sq. ft. 10 mm on RCC 20-22 sq. ft. Coverages depends on quality and nature of substrates hence is indication. Plaster >10-12 mm must be in 2 coats. Demand:- Depending upon substrate and climate add approx. 7 to 8 liters of water per 40 kg bag.