Tiles Fixing Adhesive Exporter, Manufacturer and Supplier
The cracking of tiles or a hollow sound on a tiled floor is caused by the cement and sand mixture which doesn’t form a level base to cover the entire tile surface when fixing them. The perfect solution for this is to use Tiles Fixing thin-set adhesives. Tiles Fixing Adhesive is a factory made cementitious dry powder which is mixed with water or special liquid additive to form a paste, providing problem-free, full bedding tile/stone installation. Tiles Fixing thin-set adhesives have high bonding strength allowing the tiles to directly fixed to the substrate. Manufactured under stringent quality control procedures, Tiles Fixing Adhesive products have been globally proven and professionally endorsed for years.
• Areas of Application
Tile Fixing Adhesive can application For fixing all types of ceramic tiles on interior and exterior floor & wall surfaces.For fixing a variety of tiles like glazed and unglazed ceramic, porcelain, mosaic, vitrified tiles etc. on horizontal and vertical masonry or tiled surfaces in interiors and exteriors. For fixing a variety of natural stones (marble, granite, marbonite etc.) on horizontal masonry or tiled surfaces in interiors and exteriors. When fixing natural stones and heavy tiles on vertical surfaces the use of Multi-purpose Polymer is mandatory.
• Benefits of Tiles Fixing Adhesive
• Ready-to-use mixtures • High bong and shear strength • Low water absorption • Minimize shrinkage cracks • Less labour and time intensive • Trafficable (ready for use) in 24 hours • Long pot life • No water curing or pre-soaking of tiles needed • Tile fixing from any corner • Good shock resistance • Tile-on-Tile application • Resistant to Stains and Seepage • Good Water Retention and Resistant • High Bond Strength • No Hollowness between Tile and Substrate • Thin Layer Setting
• Direction For Use:
Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix Tile Fixing Adhesive with clean water, in the proportion of 3.5 volumes of powder to 1 volume of water. • Mix till a uniform consistency smooth mortar is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the mortar. • Apply the mortar uniformly on to the surface to be tiled as well as on the back of the tile and press the tile in position. • For increasing the coverage of the material notch trowel technique can be used. • While using Tile Fixing Adhesive wetting of the tiles may be required in some type of tiles. Fill tile joints after 24 hours of tile laying.
• Packaging and Storage:-
• Packing: Tile Fixing Adhesive is available in 40 kg, 20 kg, and 5 Kg multi-wall laminated sacks. • Shelf Life: 12 months from the date of manufacture if stored in a cool, dry place in original packing.
One kg of Tile Fixing Adhesive yields a paste of 600 cc. 1 kg of Tile Fixing Adhesive can fix tiles on an area of 3.22 sq ft. if tiles are fixed with a uniform bed thickness of 2 mm .